Dry Ice Blasting Spray Foam Removal in Plymouth
Dry Ice Blasting Spray Foam Removal in Plymouth is the fastest way to strip failed polyurethane foam from rafters, tiles and timber without solvents, water or sand. We handle open cell and closed cell foam on lofts, roofs and cavity walls across Devon, and we leave the structure clean enough for a surveyor to sign off. If a lender has flagged your insulation, call us first.
Service overview
What Dry Ice Blasting Spray Foam Removal in Plymouth involves
Dry ice blasting spray foam removal uses compressed air to fire small pellets of solid carbon dioxide at the foam surface. The pellets hit at roughly -78C, which makes the polyurethane brittle, and the kinetic energy lifts it away from timber, plasterboard and tiles. Because the dry ice turns straight back into gas on contact, there is no water, no grit and no chemical residue left behind. We then clear the loosened foam with an industrial vacuum and hand tools, so the roof space is left dry and ready for inspection or new insulation. Plymouth has a lot of older housing stock, and much of it sits close to the coast where damp and condensation are constant problems. Spray foam that was installed to stop draughts often traps moisture instead, and we see the results in timber decay, roof damage and ventilation blockage across the city. That is why dry ice spray foam removal Plymouth homeowners search for is usually driven by a mortgage refusal or a failed survey rather than a planned upgrade. If a lender has raised a question, we can usually answer it in a single visit.
! Common warning signs
Mortgage lender refuses to lend on foamed roof
The purchase or remortgage stalls, and you may lose your buyer or your rate if the issue is not resolved quickly. Valuers want to see bare timber and clear ventilation before they will sign off.
Condensation and damp trapped behind spray foam
Trapped moisture causes timber decay, mould on sarking boards and rusted fixings. Left alone, it can compromise the roof structure and lead to expensive repairs beyond the foam removal itself.
Foam blocking eaves and ventilation gaps
Blocked ventilation traps warm moist air in the loft, which feeds condensation and can push damp into ceilings below. It is one of the most common reasons a surveyor flags spray foam in Plymouth.
Scope of work
What our dry ice blasting spray foam removal includes
Every quote covers the full removal and clean-down, not just the blasting. We tell you upfront what is included and what would be a separate job, so there are no surprises on the invoice.
-
01
Full foam removal
We remove all accessible spray foam from rafters, purlins, sarking boards, wall plates and roof tiles using the dry ice blasting machine, followed by hand tools on stubborn sections. The aim is bare timber with no foam residue left behind.
-
02
Dust control and extraction
We seal the work area, run extraction throughout, and wear protective clothing and respirators. Floors and loft hatches are sheeted before we start, and we vacuum every surface after blasting so nothing is left for you to clear up.
-
03
Waste bagging and disposal
Loosened foam goes into sealed bags and is removed from site the same day. Disposal is included in the price and handled through licensed routes in Devon, so you do not need to arrange a skip or a separate waste collection.
-
04
Completion photos and report
We photograph the finished roof space and send the images to you or your broker, along with a short note on what we found and any ventilation issues. That pack is usually enough for a valuer or lender to close the file.
Why Plymouth homeowners choose dry ice blasting
Dry ice blasting removes spray foam faster and more cleanly than scraping, sanding or chemical strippers. Here is what that means for your property, your survey and your timescale.
Get a quoteEquipment and methods we use
Dry ice blasting machine
Fires CO2 pellets at the foam surface to freeze and lift it without water or chemicals. We run a variable-pressure unit so we can dial down on fragile sarking boards and dial up on dense closed cell foam.
Industrial vacuum and extraction
Captures loosened foam fragments and airborne dust at the source. We run extraction throughout the job and vacuum every surface afterwards, which keeps the rest of the house clean.
Spray foam removal tools
Scrapers, saws and hand tools for the stubborn patches the blaster cannot shift on its own. Closed cell foam often needs a saw along rafter edges, and hand tools finish the job around fixings and cables.
Protective clothing and respirators
Full PPE for every technician on site, including coveralls, gloves, eye protection and respirators. Foam dust is not something you want to breathe, and we treat every Plymouth job as if the loft is occupied.
Local execution
Plymouth is a coastal city with a lot of older housing, and that combination is hard on spray foam. Properties in Stonehouse, Mutley and Peverell were mostly built before 1920, with slate roofs, sarking boards and limited eaves ventilation. When foam is sprayed onto those timbers it seals the roof space, and the moisture that would normally escape through the eaves gets trapped instead. Add salt-laden air from the Sound and you get condensation, timber decay and the mortgage refusals we see every week. Our dry ice blasting Plymouth Devon service is set up for exactly this building stock. We work carefully around fragile sarking, keep water out of the roof space, and check ventilation as we go. For anyone searching for dry ice spray foam removal Plymouth Devon, the practical difference is that we know where the problems hide in these houses before we start. We also handle newer estates in Sherford and Plymstock, where closed cell foam on modern trusses needs a slower, more controlled blast.
How dry ice blasting spray foam removal runs in Plymouth
- • Stonehouse
- • Plympton
- • Estover
- • Turnchapel
Recent work
Same-day and 24/7 cover across Plymouth
When a deadline is tight, we answer
Our phone line is staffed from early morning to late evening, and commercial clients can reach us 24/7 for urgent callouts. For domestic jobs we aim to survey within 48 hours of your first call and complete the work within five working days. If a lender or buyer has set a fixed date, tell us at the quote stage and we will schedule around it. Each van carries a dry ice blasting machine, extraction, hand tools and PPE, so a standard Plymouth loft can often be cleared in a single visit. We run two-person crews for most lofts and three-person crews for warehouses and large roofs, which keeps blasting time down and clean-up quick. You get a call before we arrive, a call when we finish, and completion photos the same day.
How our spray foam removal process works
Assessment
We visit, measure the foam coverage, and check whether the foam is open cell or closed cell. We also look at ventilation, vapour barrier condition and any signs of condensation or timber decay. You get a written scope and a fixed price the same day, usually within two hours of the visit.
Protection
Before any blasting starts, we sheet up floors, seal doorways and isolate the working area. Technicians wear protective clothing and respirators, and we set up extraction so dust and foam fragments stay inside the work zone. On a typical Plymouth loft this preparation takes about 45 minutes.
Blasting
The dry ice blasting machine fires CO2 pellets at the foam while a second technician follows with scrapers and saws on stubborn sections. We work in bays so the roof structure is never left exposed for long. A standard loft takes four to six hours of blasting time.
What dry ice blasting spray foam removal costs
Typical 2026 pricing in Plymouth runs from around 950 pounds for a small loft to 2,400 pounds or more for a large detached roof or commercial ceiling. The price depends on how much foam there is, how hard it is to reach, and whether ventilation work is needed afterwards. We quote after a site visit or a clear set of photos, and the price includes blasting, clearance, waste disposal and completion photos. There are no day rates and no hidden extras.
Foam area and thickness
Price is driven mainly by square metres of foam and how thick it is. A thin layer of open cell foam across a small loft is a quick job, while 100mm of closed cell foam over a large roof takes significantly longer to blast and clear.
Access and roof type
Tight loft hatches, fragile sarking and steep roofs all add time. A terraced house in Stonehouse with a small hatch takes longer to set up than a detached property in Plympton with a walk-in loft and clear working space.
Ventilation and timber repairs
If foam has blocked eaves or caused timber decay, extra work may be needed after removal. We quote for ventilation improvements or timber repairs separately, so you can see exactly what the removal costs on its own.
Frequently asked questions
How much does dry ice blasting spray foam removal cost in Plymouth?
Most Plymouth loft jobs run between 950 and 2,400 pounds in 2026, depending on foam area, access and whether the roof space needs extra ventilation work. A single small loft can come in under 950 pounds, while a large detached roof or warehouse ceiling runs higher. We quote after a site visit, and the price includes blasting, clearance and disposal.
Can you remove spray foam with dry ice blasting in Plymouth Devon?
Yes. Dry ice blasting removes both open cell and closed cell polyurethane foam from timber, tiles and plasterboard, and it is our standard method across Plymouth and Devon. The CO2 pellets freeze the foam so it lifts away without cutting into the wood. We follow up with hand tools and an industrial vacuum to clear every last fragment.
Is dry ice blasting safe for spray foam removal in Plymouth?
It is safe for the building and for you. Dry ice turns back into gas on contact, so there is no water to soak into timbers and no chemical residue left in the roof space. Our technicians wear protective clothing and respirators, and we seal the work area with extraction running throughout. The space is safe to enter as soon as we finish.
Is dry ice blasting spray foam removal covered by mortgage lenders in Plymouth?
Most lenders accept dry ice blasting as a remedy when a valuer has flagged spray foam, provided the finished roof space shows clean timber and clear ventilation. We photograph the completed work and can send the images to your broker or lender. If your lender has specific requirements, tell us at the quote stage and we will work to them.
Related services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Plymouth, we cover the whole city and surrounding Devon towns. We assess the foam, quote the removal, and can book dry ice blasting as part of the same visit.
Same day Spray Foam Removal
When a survey deadline is tight, our same day spray foam removal Plymouth service gets a technician out fast. We carry dry ice blasting equipment on the van so smaller lofts can be cleared in a single afternoon.
Book Dry Ice Blasting Spray Foam Removal in Plymouth
We quote from photos or a site visit, and we can usually fit domestic jobs within five working days. If a lender or surveyor has set a deadline, tell us and we will work to it. Call 0175 290 5074 and speak to someone who has actually done the job.